A selection of quality used bullet molds for sale.
Molds without a listed price in the "Bullet molds" section are not modified or tuned up yet but are available modified, email erik@hollowpointmold.com if interested. Prices include USA shipping.
Inset bar conversions ( Rifle SC )
| Make | Model | Description | Price |
| Lyman | 457193 | Good condition mold with Inset Bar HP conversion with a cup cavity. ( item #158 ) | $90.00 |
| RCBS | 45-405-FN | ![[Click here for picture]](/includes/camera_tiny_2.png "Click here for full size image")
(45 rifle) Good condition. Inset bar HP cup point conversion. Sprue side of mold and sprue plate surface ground. ( item #118 ) |
$115.00 |
| RCBS | 476-400-SWC | Very nice single cavity mold with HP Inset Bar conversion. ( item #167 ) | $110.00 |
Inset bar conversions ( Rifle DC )
| Make | Model | Description | Price |
| Ideal | 458423 DC |
(45 rifle) 452423 mold recut to drop at about .458 for rifle use. ( item #29 ) |
$130.00 |
| Lyman | 358315 |
(35 cal rifle) Mold is a bit rough from some wire wheeling on the sprue side, will include plain base rework if desired. Price includes double HP ( item #41 ) |
$125.00 |
| RCBS | 35-200-FN | Very nice mold with double HP Inset Bar conversion ( item #165 ) | $160.00 |
| RCBS | 7.62-130 | Very nice mold with double HP Inset Bar conversion ( item #166 ) | $160.00 |
| Lyman | 311644 | Well used but decent condition mold. Price is $45 without double HP Inset Bar work. ( item #168 ) | $140.00 |
| Lyman | 358315 |
Lightly used mold but an oops occured when slotting for the inset bar so the bar is flush with the exterior instead of captive on both ends, no ill effect on casting. ( item #156 ) |
$125.00 |
| Lyman | 257420 | Nice lightly used mold with double HP Inset Bar conversion. ( item #170 ) | $145.00 |
Inset bar conversions ( Pistol DC )
| Make | Model | Description | Price |
| Lyman | 356402 DC |
All around use HP size, bands opened (since picture was taken) to cast .364 or so for Makarov use. ( item #42 ) |
$130.00 |
| RCBS | 45-200-SWC | Nice condition mold but has home made sprue plate. Price includes double HP inset bar conversion. ( item #135 ) | $140.00 |
| RCBS | 429-240-SIL | Very nice condition mold, price includes double HP inset bar conversion. ( item #137 ) | $160.00 |
| RCBS | 45-201-SWC |
Decent condition mold with excellent cavities, Generous HP. Non-standard sprue hardware. ( item #138 ) |
$145.00 |
| RCBS | 38-158-RN |
Very nice condition mold, Cup point pins. ( item #139 ) |
$160.00 |
| Lyman | 356242 | Decent used mold, very very light scratches in cavities (would polish out ). Price includes double Inset Bar HP conversion and top punch. ( item #147 ) | $125.00 |
| Lyman | 311252 | Good used mold with double HP conversion. ( item #169 ) | $135.00 |
| LBT | 452 240 LFN |
Used but good condition LBT mold converted to double HP with the Inset Bar system. Marked 240 but casts about 310 grains with HP. (Was probably supposed to be stamped 340 not 240) ( item #171 ) |
$160.00 |
| LBT | 452 300 WFN |
Used but good condition LBT mold converted to double HP with the Inset Bar system. Marked 300 but casts about 270 grains with HP. ( item #172 ) |
$160.00 |
| Lyman | 410610 | Nice used mold tuned and ready to go with a double HP Inset Bar conversion and matching top punch. ( item #195 ) | $140.00 |
Inset bar conversions ( Pistol 4C )
| Make | Model | Description | Price |
| LBT | 454 315 K | Used but good condition LBT mold converted to drop 4 HPs at a time with the Inset Bar system. ( item #173 ) | $260.00 |
| Saeco | #373 | Used decent condition mold with an double Inset bar HP conversion for the middle two cavities. ( item #174 ) | $165.00 |
| Lyman | 452630 | Used mold with cosmetic flaws. Price shown is with 4 cavity Inset bar conversion, plain mold w/o HPs is $45. With just two cavities HP'd it is $140. ( item #175 ) | $210.00 |
| Lyman | 429215 |
Used but nice mold. Four big HP cavities. Missing handle screws. ( item #176 ) |
$235.00 |
Inset bar conversions ( Lee Pistol DC )
| Make | Model | Description | Price |
| LEE- NEW for 2012 | Various Lee pistol models |
Complete new Lee double cavity mold with handles converted with my super easy casting double Inset-Bar-2 hollow point sytem. Increases alignment bar area over 3.5x and guides blocks to close properly. Altered mold fully guaranteed by me! ( item #179 ) |
$85.00 |
| Lee | 9mm #90309 |
Complete new Lee DC HP RN converted mold. Super fast casting HPs for your 9mm or 380. ( item #186 ) |
$85.00 |
| Lee | 38/357 #90303 |
Complete new Lee DC HP RN converted mold. Super fast casting HPs for your 38 or 357. ( item #187 ) |
$85.00 |
| Lee | 40 cal #90256 |
Complete new Lee DC HP TC converted mold. Super fast casting HPs for your 40 cal or 10mm. Casts at about 165-170 gns. ( item #188 ) |
$85.00 |
| Lee | 44 cal #90285 |
Complete new Lee DC HP RN converted mold. Super fast casting HPs for your 44s. ( item #189 ) |
$85.00 |
| Lee | 45 cal #90234 |
Complete new Lee DC HP SWC converted mold. Super fast casting HPs for your 45s. ( item #190 ) |
$85.00 |
| Lee | 45 ACP #90351 |
Complete new Lee DC HP RN converted mold. Super fast casting HPs for your 45s. ( item #193 ) |
$85.00 |
| Lee | 38/357 #90322 |
Complete new Lee DC HP GC SWC converted mold. Super fast casting HPs for your 38 or 357. About 152 grains with GC and lube. ( item #194 ) |
$85.00 |
| Lee | 45-230-TC #90290 |
Complete new Lee DC HP converted mold. Super fast casting HPs for your 45s. ( item #196 ) |
$85.00 |
| Lee | 356-102-1R |
Complete new Lee DC HP GC SWC converted mold. Super fast casting HPs for your 380 or 9mm. About 85 gns. ( item #197 ) |
$85.00 |
Inset bar conversions ( Lee muzzle loader )
| Make | Model | Description | Price |
| Lee | 50-250-REAL |
Complete new Lee DC HP converted mold. Super fast casting HPs for your muzzle loader. ( item #191 ) |
$85.00 |
| Lee | 45-200-REAL | Complete new Lee DC HP converted mold. Super fast casting HPs for your muzzle loader. Out of stock,will rerun for your order. ( item #192 ) | $85.00 |
Standard hollow point molds ( Pistol SC )
| Make | Model | Description | Price |
| Lyman | 358250 | Nice older mold in good condition, price includes HP conversion. ( item #161 ) | $80.00 |
| Ideal | 42498 | Standard HP mold in nice shape. Can open bands to cast about .431 ( item #159 ) | $80.00 |
| Ideal | 358416 | Nice old mold in good condition, price includes standard HP conversion. ( item #162 ) | $80.00 |
Bullet molds ( Rifle SC )
| Make | Model | Description | Price |
| Lyman | 457132 SC | (45 Rifle) Like new. ( item #33 ) | $50.00 |
| Lyman | 410660 | Nice condition blackpowder cartridge rifle mold. HP conversion available. ( item #132 ) | $45.00 |
Bullet molds ( Pistol SC )
| Make | Model | Description | Price |
| Ideal | 311316 | Very nice mold. Available with Standard HP also. ( item #177 ) | $50.00 |
Bullet molds ( Pistol DC )
| Make | Model | Description | Price |
| Lyman | 452389 | Nice mold but sprue plate pour holes have been messed with. Similar to the 452488 but with a RN tip. HP conversion avail if desired for extra fee. ( item #149 ) | $50.00 |
Legality of hollow-point bullets in your area is your responsibility. I do not offer load data advice. Load development and load safety is entirely your responsibility.
Copyright 2009, 2010 by E. Ohlen
Site design & programming by C.A. Ohlen